#>> JBL MS-8 MS Series Digital Processor ✔★

JBL MS-8 MS Series Digital Processor

From the Manufacturer

The correct answer to the question “What can I do to improve the sound of my audio system?” Depending on the nature and composition of the various parts of the answer today. Get the JBL MS -8 processor integration of digital systems. . “MS-8 is a new type of car audio equipment, automatic equalizer to optimize the car ten minutes flat, just follow the installation step by step, the MS-8 improve the bandwidth, low-frequency, dynamic, clear and detailed , and stereo system – all important sound parameters on the size – almost any combination of pre-and / or replacement parts, and if his victory leaves us with 31-band graphic equalizer and full orders a regular daily tasks.?.


The JBL MS-8 processor is a sophisticated digital signal processor that will deliver great sound from any car audio system.

Why JBL Sound?

What is the installation key is simple. Before the JBL MS-8, which requires a lot of elements that turn your car into something worth hearing. E is a complex, expensive and requires half the cars on the floor during the installation to complete. MS-8, to install a total of only three components. Digital signal processor, display and remote control.

After you install the MS-8, and the energy calibration of the MS-8 is a piece of cake. Calibration menu is available in five straight LCD, allowing for easy installation, step by step, which can be completed in about 10 minutes. Although the binary play on CD-ROM covers process, the two microphone audio is digitally signed, and notes that sound in your car. The headset is the smallest change in sound absorption and reflection, and communication channels to the MS-8 DSP. You can continue to calibrate up to three pages and places where you can make 31-band graphic equalizer and a range of tone controls for the daily work on the LCD screen and do the remote control. .

Powerful Processing

What makes the MS-8 unlike the typical car audio product is that rather than replacing a component like a speaker or a head unit, it is designed to be added to your existing system to get great sound from what you already have. So, how does the JBL MS-8 really make an existing system sound better?


The MS-8’s uses advanced equalization DSP to improve tonal accuracy

MS-8 Digital Signal Processor

In the heart of MS-8 Digital Signal Processor. At JBL, we know that the voice and cars. Our engineers have all this experience in drawing up their own DSP to automatically assume all the vehicle’s audio system for the best sound. Use contains a detailed presentation of binaural microphones that measure and all measures to improve the vote (in the band, low-frequency, dynamic, clear and detailed and stereo), a number of OEM spare parts. To do this, millions of seconds, with thousands of instructions.

From the inside of each vehicle is different and can have a major influence on the sound quality by DSP-MS-8 also increases the signal and have determined the milking. Notes the efforts binaural headphones and compensating balances for the vehicle features the signature speakers and electronic equipment. And if you do not have enough good voice, and MS-8 DSP, a measure of entry into force and applies the algorithm to the start of the summit. The application of the correction phase, the MS-8 to ensure that the sound from each speaker to report the same time. This improves the image processing system, clarity and realism. In fact, MS-8 strong enough to do it in four different places.

The right to vote is only part of what the MS-8 DSP so strong. Although the sound is in perfect condition, which is not conducive for such a wonderful experience that all his music sounds like it comes from the bottom of the door. There is Logic 7 JBL comes in.


Logic 7 surround processing realistic and enveloping 5.1 or 7.1 sound

Logic 7 Surround Processing
Today we live in a multi-channel world. Much of our stereo, 2-channel listening is a thing of the past. JBL has led the way for a number of years in creating realistic and engaging sound experiences from any material using a proprietary surround processing algorithm called Logic 7. Once having corrected for the audio performance of the sound system, the MS-8 processor employs Logic 7 to create a realistic and enveloping 5.1 or 7.1 sound never before experienced in a vehicle. It’s like having a home theater system on wheels. Logic 7 spreads the sound across your dashboard adding a sense of space to the inside of your car. And remember your music crammed in the bottom of your doors? With Logic 7 that’s a thing of the past. Vocals and instruments will now be realistically placed across the interior of your vehicle much like having the best seats in the house at your favorite concert. And best of all, Logic 7 is automatic right out of the box.

Complete Customization


The JBL MS-8 can easily integrate into any combination of factory-installed and/or aftermarket components Click to Enlarge

The bi-aural microphone headphones, 5-line LCD screen and wireless remote control make setup and use of MS-8 easy. Click to Enlarge

Easy System Expansion

What makes the JBL MS-8 so revolutionary is that it is designed to make any car audio system sound great including a factory sound system. With a high-quality 20 watt X 8 amplifier onboard in addition to both pre-amp and speaker-level inputs and outputs, it can easily improve the power of a factory or aftermarket head unit. But it doesn’t stop there.


The MS-8 will ensure you get all the performance you are paying for out of your aftermarket car audio system.

When you are ready, the MS-8 can serve as the foundation of a truly special car audio system when you add subwoofers, a center speaker, amplifiers or even video components directly to the MS-8 down the road. It’s as close to “Plug-and-Play” as you will find, saving hours on future installation and set-up time.

Installation Made Simple

What is the installation key is simple. Before the JBL MS-8, which requires a lot of elements that turn your car into something worth hearing. E is a complex, expensive and requires half the cars on the floor during the installation to complete. MS-8, to install a total of only three components. Digital signal processor, display and remote control.

After you install the MS-8, and the energy calibration of the MS-8 is a piece of cake. Calibration menu is available in five straight LCD, allowing for easy installation, step by step, which can be completed in about 10 minutes. Although the binary play on CD-ROM covers process, the two microphone audio is digitally signed, and notes that sound in your car. The headset is the smallest change in sound absorption and reflection, and communication channels to the MS-8 DSP. You can continue to calibrate up to three pages and places where you can make 31-band graphic equalizer and a range of tone controls for the daily work on the LCD screen and do the remote control. .

The JBL MS-8 is the best first step for getting great sound in your car.

System Highlights


Click for Product Info Sheet
  • Superior Performance from Any System–Improves every measure of audio performance, frequency response, bass performance, dynamics, clarity, detail and stereo imaging from any combination of OEM and aftermarket components.
  • Easy, Step-by-Step Setup–Simple menu-driven calibration based on detailed input from a binaural headset microphone
  • Optimizes Up To Eight Input Channels–Produces a smooth response, full-bandwidth signal from up to eight input channels.
  • DSP Equalization–Improves tonal accuracy by automatically compensating for the sonic characteristics of the speakers, electronics and vehicle interior
  • DSP Time Correction–Automatically ensures that the sound from all speakers arrives at the listener’s ears simultaneously, in up to four individual seating positions, dramatically improving clarity and imaging.
  • Sophisticated Crossover Functions–Precise, user selectable crossover points and crossover slopes for up to eight separate outputs.
  • Logic 7 Surround Processing–Creates a realistic 5.1- or 7.1-channel surround experience from 2-channel source material.
  • 31-Band Graphic Equalizer–Override automatic equalization to suit personal taste
  • Preamplifier Controls–Control system volume, subwoofer volume, left/right balance, front/rear fader, bass/mid/treble tone controls, override DSP equalization, time correction and Logic 7 processing.
  • Favorite Settings –Store up to five custom settings for one-button recall
  • LCD Display–Five-line, 128 x 64-pixel screen displays setup menus and operation status
  • Wireless RF Remote –Controls menu navigation, volume and mute.
  • Onboard 20 Watts x 8 Amplifier, Eight-Channel Preamp-Level and Speaker-Level Inputs and Outputs, Full-Range Stereo Aux Input

Read more or check price here : JBL MS-8 MS Series Digital Processor

Related Products:

JBL L820 Four-Way Speaker

Audioaccess 3-way On-Wall indoor/outdoor speaker system

JBL L890 4-Way

JBL 5.1 Channel Surround Cinema Speaker System

JBL SCS300.7 Complete 7.1-Channel

About bestpricereview

We are associated with Amazon. We choosed the best selling products from Amazon and the best compare prices products. You can check new products in my blog on this link and I recommend you to visit my blogroll or my site.
This entry was posted in Electronics and tagged , , , , , , , , , , . Bookmark the permalink.

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s